1.1.9
Internal connectors
1.
Intel
Z370 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA6G_34)
®
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
Z370 chipset.
•
These connectors are set to [AHCI] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[Intel RST Premium With Intel Optane System Acceleration (RAID)].
•
Before creating a RAID set, refer to section RAID configurations or the manual
bundled in the motherboard support DVD.
•
When using NCQ, set the SATA Mode in the BIOS to [AHCI]. Refer to section SATA
Configuration for details.
ROG MAXIMUS X APEX
Rapid Storage Technology through the onboard Intel
®
®
1-19