Asus Rog Maximus X Apex User Manual page 37

4. USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 MBps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
1 x USB 2.0 port (USB1314) at mid-board shares with ROG extension (ROG_EXT) port.
ROG MAXIMUS X APEX
1-21