C. Replacing the IOC ASSY
When the IOC PCB is replaced with a spare part one.
• Firmware is already installed on it.
• The fi rmware version is confi rmed at power on and, if necessary, it is automatically updated.
• UUID setting is not required.
C-1. Undo 11 screws and remove the CHASSIS/BOTTOM.
NOTE: There are two types of screws (S2 × 6, S7 × 4).
Supplementary explanation
– 44 –
CHASSIS/BOTTOM
Screw (S2)
7
Screw (S7)
4
V-R200 / VER.1
H-4