Product Specifications - Casio EX-843 Service Manual

Y Specifi cations List
Main display
Touch panel
Sub display
Printer
Memory protection *2
Power supply/
power consumption
External interface
Water proof performance
Temperature/humidity
(when in use)
External dimensions
Weight
*1: These fi gures indicate the performance level of the hardware. The actual colours and speed vary depending on
the application in use.
*2: The internal battery is a consumable item. Contact the dealer or the CASIO service representative around
5 years after purchase to replace the battery (this time depends on how the product is used). Memory protection
may not operate properly if the battery becomes depleted.
*3: After 1 hour of disconnect power, the product will shut itself down. To turn the power ON, press the power
switch after power recovery.
*4: With a battery usage frequency of once per month.
*5: The specifi cations here are test values, and are not guaranteed values.

PRODUCT SPECIFICATIONS

Type
Resolution
Color *1
Backlight
Other
Method
Size
Resolution
Backlight
Print method
Print speed *1
Paper roll
Paper cut-off
Battery
Memory holding *3
Battery life *4
Charge time
Time holding
120 V ac ±10 V 50/60 Hz 0.64 A (Operating) 0.2A (Standby)
220 V to 240 V ac ±10 V 50/60 Hz 0.36 A (Operating) 0.11A (Standby)
Side of display
Back of the device
IP53 level (main display only) *5
0°C to 40°C/20% to 85% RH
W 395 mm x D 237 mm x H 229 mm
(With maximum tilt angle) (Not including protruding parts)
Approximately 4.0 kg
10.4 SVGA color TFT LCD
800 × 600
Max. 16.77 million colors
White LED
Power tilt function (15° to 75°)
4-wire resistive fi lm
10.4 inch
32 × 160 dot (20 single-byte characters, 2 lines)
2 colors (emerald green, white)
Thermal printer
Max. 120 mm/sec.
Thermal recording paper, width 58 mm or 80 mm,
external diameter 80 mm or smaller
Automatic cutter
Nickel-metal hydride rechargeable battery
Approximately 1 hour (used at 25 °C)
5 years (used at 25 °C)
Full charge in 6 hours (used at 25 °C)
Approximately 30 days (used at 25 °C)
SD/SDHC memory card slot x 1
COM port x 3, LAN port x 1, USB port x 1, DC jack x 1
– 8 –
V-R200 / VER.1