Casio EX-843 Service Manual page 11

Y Parts Names and Functions
1 11
Front
3
2
1 Printer cover
2 Printer head
3 Auto cutter block
4 Paper holder
Main display and touch screen
5
panel
6 Side cover
7 Connector cover
8 Power switch
9 Power lamp
10 Sub display
11 Paper roll
12 SD/SDHC memory card slot
13 Card cover
14 Boot cover
15 Boot switch
16 Reset switch
17 Maintenance switch
18 Tilt switch
NOTE 1: Do not put your fi ngers in the Auto cutter unit while the receipts are being cut. This may result in
injury.
NOTE 2: Before removing the power plug or turning the breaker off for moving or cleaning the product, for
example, make sure to shut down the power by pressing and holding the power switch. The data
may be damaged or the product may be broken if the above procedure is not done properly.
10 4
9
8
5
Open this replacing the paper roll. Keep closed during normal use.
Prints the receipts.
The customer receipt is cut automatically when it is issued.
Open this when replacing the paper roll.
Display each menu. Used for data input.
Cover for SD/SDHC memory card slot.
Open when connecting the power supply or various devices.
Turn the power ON. Switch the ON and OFF of the main display.
Display the status of the power supply.
Green
Orange
Red
NOTE: When the power lamp is red, do not shut down the power or
Displays information for customers.
Insert the roll of paper used for receipts, etc.
Insert the SD or the SDHC memory card.
Cover for the SD/SDHC memory card slot (screw lock).
Boot cover
Boot device setting *User operation prohibited.
Reboot without shutdown *User operation prohibited.
Shutdown (by a long press) *User operation prohibited.
Adjusts the angle of the main display.
17
16
12
7
15
6
18
Dallas key
For operators to sign on and off. (Factory option)
Starting
Main display OFF
Insuffi cient internal memory protection battery capacity
remove the power plug.
– 9 –
V-R200 / VER.1
13
14