Connecting An Imageshare Ii To Component Systems; Connecting Computers To Component Systems - Polycom VSX 3000 Administrator's Manual

VSX 5000
VSX 6000
VSX 6000A
VSX 7000
VSX 7000s
50 ft (15 m)
2457-20910-050
or 30 ft (9 m)
2457-20910-001
The ferrite bead
must be at the end
connected to the
system.

Connecting an ImageShare II to Component Systems

Connecting Computers to Component Systems

The following diagram shows supported cable configurations for connecting
a Visual Concert VSX with a SoundStation VTX 1000 conference phone.
10 ft (9 m)
2457-21624-001
or 3 ft (0.9 m)
2457-21625-001
To show material from your computer, you may connect an ImageShare II unit
to any component system in the VSX series. The ImageShare II gives you
control over whether others can see what is displayed on your computer.
Refer to your system's setup sheet for connection details.
You can connect your computer directly to a VSX 7000e or VSX 8000 system.
When you do this, other call participants see everything that you see on your
computer.
Refer to your system's setup sheet for connection details.
Content and Closed Captions
The Visual Concert VSX and
the SoundStation VTX 1000
must be connected in this
order.
5 - 5