Connecting To Isdn Or Other Networks; Connecting Desktop Systems To The Isdn Bri Network - Polycom VSX 3000 Administrator's Manual

Connecting to ISDN or Other Networks

Connecting Desktop Systems to the ISDN BRI Network

The following network interface modules are available with some VSX
systems:
• BRI — Allows you to connect to an ISDN network using up to four BRI
lines.
• PRI — Allows you to connect to an ISDN network using a PRI line.
• V.35/RS-449/RS-530 — Allows you to connect to third-party network
equipment, including encryption equipment and RS-366 dialers.
The table below shows the network interfaces available for each model.
ISDN - BRI
VSX 3000 Built in to model with IP
VSX 3000A and ISDN
VSX 5000 Available in a separate
housing
VSX 6000A Available in a separate
housing
VSX 6000 Not Available
VSX 7000 Available
Network interface modules fit into subwoofer housing
VSX 7000s Available
Network interface modules fit into subwoofer housing
VSX 7000e Available
VSX 8000 Available
The VSX 3000 and VSX 3000A desktop systems are available with or without
the built-in Quad BRI network interface. The setup sheet for the IP with ISDN
system shows how to connect it to a BRI network.
If you purchased the VSX 3000 or VSX 3000A system with IP and ISDN, you
will need:
• NT-1 device, if the system will be connected to a network that provides a
U interface
ISDN - PRI
Not Available
Not Available
Not Available
Not Available
Available
Available
Available
Network interface modules fit into back panel
Available
Network interface modules fit into back panel
Networks
V.35/RS-449/RS-530
Not Available
Not Available
Not Available
Not Available
Available
Available
Available
Available
2 - 15