Displaying Contacts On The Home Screen; Adding Marquee Text - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Displaying Contacts on the Home Screen

Adding Marquee Text

7 - 6
Sites configured for speed dial are displayed on the home screen. You can also
display them on the contact list home screen.
To configure speed dial sites:
1. Make sure that the site information is entered in the directory.
2. Go to System > Admin Settings > General Settings > Home Screen
Settings.
3. Select two times and enable Sites.
4. Select three times to access the Sites screen.
5. Select Add and choose the sites to add from the directory.
6. Select either Speed Dial or Contacts as the name you want to appear on
the button.
To display the contact list home screen:
1. Go to System > Admin Settings > General > Home Screen Settings.
2. Select Contact List.
You can create marquee text to display in the dialing entry field on the home
screen. You can create context-specific instructions for your users or, if the
home screen has Site buttons, the marquee text can provide information that
helps users choose which site to call.
To enter marquee text in the system's web interface:
1. Go to System > Admin Settings > General Settings > Home Screen
Settings.
2. In Dialing Display, select Display marquee and enter the text.
You can also add marquee text through the system's web interface. For some
languages such as Russian, Korean, Japanese, Simplified Chinese, and
Traditional Chinese, you must use the system's web interface to add marquee
text.
To enter marquee text using the system's web interface:
1. On a computer, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://10.11.12.13
, to go to the system's web interface.