Table of Contents
Advertisement
Configuration Interface
The configuration interface for the G-Force 850 b/g Broadband Wireless Base Station is
web-based, with an IP address that defaults to 10.0.0.1. To access the interface, point
your web browser to the base station's configuration IP address. The default username
and password are both "admin".
The first page that appears on access is the System Status page, as shown in Figure 2.
The rest of the configuration pages are listed on the left-hand side of the page, and
described below.
Note: After changing the device configuration, you must reboot the device before the
changes will take effect. See Reboot on page 24 for the procedure.
Figure 2.
Opening Configuration Screen
7
Advertisement
Table of Contents
