G-Force 850 b/g Broadband Wireless Base Station
User's Manual
The options available for WPA-Enterprise encryption are as follows:
Encryption Method
802.1x
EAP Message
NAS Identifier
Authentication Radius
Server
Accounting Radius
Server
When you have entered the desired options, click Save to set them.
SNMP Setup
The SNMP Setup page allows you to enable and configure SNMP support.
Figure 13. Network > SNMP Setup
18
Sets the encryption method required to access the
network. At this point, the only method available is
TKIP.
Enables/disables 802.1x port authentication on the
network
Sets an EAP message to be sent out with the
EAP-Request/Identity frame (optional)
Sets the NAS identifier for the RADIUS server
(optional)
Sets the RADIUS server (IP address, port, and
secret) used for client authentication
Sets the RADIUS server (IP address, port, and
secret) used for client accounting
Version 0.1