Table of Contents
Advertisement
Network
The Network section configures network options and connectivity, including IP address,
RF settings, SNMP, and wireless networks connected to the base station.
IP Setup: Changing the Configuration Interface IP Address
The IP Setup page allows you to configure the IP address used by the base station for
the web-based configuration interface.
Figure 6.
Network > IP Setup
The options are as follows:
Configuration Method
IP Address
Subnet Mask
Gateway
DHCP
When you have entered the desired options, click Save to set them.
Sets the method used to determine the device IP
address: DHCP or Static IP
When Static IP is selected, sets the device IP
address
When Static IP is selected, sets the subnet mask
used by the device
When Static IP is selected, sets the gateway used by
the device
When DHCP is selected, sets the host name to be
sent with the DHCP request
Configuration Interface
11
Advertisement
Table of Contents
