Table of Contents
Advertisement
The SNMP options are as follows:
Enable SNMP
Community String
System Location
System Contact
When you have entered the desired options, click Save to set them.
QoS Setup
The QoS Setup page allows you to turn on and configure the base station's WMM QoS
support.
Figure 14. Network > QoS Setup
Enables/disables SNMP support
Sets the community string required to access the
base station
Sets a string used to identify the location of the base
station
Sets the email contact for this base station (that is,
the network administrator)
Configuration Interface
19
Advertisement
Table of Contents
