3) Turn the set upside down and Release the shaft retaining bearing and slid it away from the roller.
Release the Pick Up spring.
4) Push the rollers firmly towards the frame, if necessary rotate the shaft so that the rubbers do not contact
the frame. Release the shaft and bush from the end support. Note this support is fragile take great care.
Then slide the shaft back away from the frame to remove it.
C. Bush and Support
C. Bush and Support
Samsung Electronics
B. Spring
B. Spring
A Shaft retaining bearing
A Shaft retaining bearing
Disassembly and Reassembly
Service Manual
6-47