Samsung CLP-510/XBH Service Manual page 93

Disassembly and Reassembly
6.4.19 Pick-UpAss'y
>> Before disassembling it:
*Disassemble all consumable parts (Toner cartridges, ITB unit and OPC drum) (Refer to 6.3.3)
*Disassemble the front cover and top cover (Refer to 6.4.1)
*Disassemble the rear cover. (Refer to 6.4.3)
*Disassemble the duplex cover. (Refer to 6.4.4)
*Disassemble the SMPS & main PBA. (Refer to 6.4.7)
*Disassemble the Erase Lamp. (Refer to 6.4.14)
*Disassemble the Waster Toner Ass'y (Refer to 6.4.18)
1) Undo 2 screws (3*10 silver) and remove the "Pick-up Solenoid". Then remove the plastic circlip which
retains the Pick-Up Gear and also remove the gear wheel. Release the shaft retaining bearing.
Pick-Up Solenoid
Screw
Screw
2) Remove the 3 screws (4*10 silver) in the "Pick-up Ass'y"
Service Manual
6-44
Screw
Screw
Screw
Pick-Up Ass'y
Samsung Electronics