5.1.3 Toner Cartridge (Development Section)
In the development stage toner particles are transferred from the toner cartridge onto the surface
of the OPC drum. The OPC drum and the developer roller rotate in opposite directions. Toner on
the developer roller is charged to the developing voltage (-370V ± 3%). Toner is attracted to the
OPC drum in those areas where the OPC drum surface charge is -50V. Toner is not attracted to
those areas of the surface carrying a -600V charge.
Dev Gap
Dev Roller
Developing
Voltage
1) Type
* Developing method: Non-magnetic, Mono-component developing system.
* Toner cartridge order: K, Y, M, C from top.
* Developing sequence: Y, M, C, K
* Life span: 7K(K) / 5K(C, M, Y)
* Power: DEVE motor (BLDC)
* Power transmission: Electric clutch
* Dot counting method
Samsung Electronics
OPC
DEV. - Magenta
DEV. - Magenta
Drum
DEV. - Black
DEV. - Black
DEV. - Yellow
DEV. - Yellow
DEV. - Cyan
DEV. - Cyan
System Outline
OPC
OPC
Service Manual
5-3