Exploded Views And Parts List - Samsung CLP-510/XBH Service Manual

9
9
9. Exploded Views and Parts List (CLP-510/XBH)
Abbreviations for parts description
BRKT Bracket: ex)IPR-BRKT SMPS
CS Compress: ex)SPRING-CS
ELA Electrical Assembly: ex)ELA UNIT-ITB
HOU Housing: ex)ELA HOU-COVER FRONT
IPR Iron Press: ex)IPR-BRKT SMPS
M Mold: ex)COVER-M-WASTE TONER UPPER
Exploded drawings and service parts lists are given for items which may
be expected to have a higher failure rate.
Where a failure occurs you can identify the part in the exploded diagram
and, using the parts cross reference number, refer to the appropriate parts
list to identify the part number.
Note : Parts numbers given here are correct at the time of publication.
When ordering parts please use the on-line ordering system to check if
there have been any changes to part numbers.
Part Number & Description format.
Part numbers and descriptions are defined according to a company standard. The information below
will help you to understand the part number format and assist when ordering spare parts.
There are two types of Part number format.
This format is used throughout Samsung on all product ranges.
Typically it is used for small components and electronic parts.
This format is controlled by individual Samsung Divisions and is used on specific
products, typically for mechanical parts. Type 2 format part numbers fall into 2 categories:
Assemblies consisting of 2 or more parts. Also used for Service manuals,
user guides and diagrams.
Ass'y parts and A/S privately used Parts can be distinguished by the part Code and Description.
They are always Type 2 format. The 2 leading characters indicate private or assembly parts.
number
MEA Mechanical Assembly: ex)MEA UNIT-BRKT ECU UPPER
MEC Mechanic Combined unit: ex)MEC-BRUSH ANTISTATIC
PBA Printed circuit Board Assembly: ex)PBA MAIN-CONTROLLER
PMO Processing Mold: ex)PMO-COVER REAR
PPR Plastic Press: ex)PPR-SHEET/GUIDE PAPER
RPR Rubber Press: ex)RPR-RUBBER
letter