Samsung CLP-510/XBH Service Manual page 95

Disassembly and Reassembly
6.4.20 Pick-Up Roller replacement
Note It is not necessary to remove the Pick Up Assy in order to replace the Pick Up Roller
>> Before disassembling it:
*Disassemble all consumable parts (Toner cartridges, ITB unit, Waste Toner Collector and OPC
drum) (Refer to 6.3.3)
*Disassemble the rear cover. (Refer to 6.4.3)
*Disassemble the SMPS (Refer to 6.4.7)
1) Undo 2 screws (3*10 silver) and remove the "Pick-up Solenoid". Then remove the plastic circlip which
retains the Pick-Up Gear and also remove the gear wheel. Release the shaft retaining bearing and
remove it.
2) Remove the paper cassette. Use a vacume cleaner to remove any waste toner from the Waste Toner
collectors inside the OPC space.
Service Manual
6-46
Waste Toner Waste Toner
Collectors Collectors
Samsung Electronics