1-4. Installing the Options
1-4-1. Installing the Plug-in Boards
n
Be sure to turn off the POWER switch before starting
installation work.
If installation work is started with the POWER switch left
on, it may cause electrical shock or damage to printed
circuit boards.
Installation
1. Turn off the main power of the MKS-8700 and
disconnect the AC power cord from the wall outlet.
2. Loosen the four screws (with drop-safe) and remove
the front panel in the direction of the arrow.
Screws
(with drop-safe)
1-4
3. Remove the four screws (B3 x 5) and remove the
4. While the eject levers are kept open as shown in the
Screws
(with drop-safe)
plug-in board loose-proof assembly.
B3 x 5
Plug-in board
loose-proof assembly
illustration, insert the plug-in board into the board
guide rails.
Eject levers
Plug-in board
Name of option
Name of board
MKS-8701
RC-90
MKS-8702
IF-848
B3 x 5
Slot on the front side
2, 3, 4, 5, 6
2, 3, 4, 5, 6
DCU-8000 IM