When transporting in the low temperature environment, refer to "c. Transporting by plane or ship or others or transporting in low temperature environment such as

below freezing".

If the ink remains in the printer when transporting the printer, it can cause damage to the printer by the freeze of ink.

Item

[Prep. MovePrinter] on the Main menu Perform [Limited].

Allowed tilting angle

Ink consumption

Ink drainage area

Ink tank

Separation of printer and stand

Maintenance cartridge

Replacement of consumable parts

Service support

Transportation procedure

1) Remove the paper and roll holder.

2) Select [Set/Adj. Menu] > [Prep.MovePrinter] > [Limited].

3) Press the [OK] key and perform transportation mode.

4) When the message completed the transportation mode appears, turn off the power, and remove the power cord and interface cable and check that the heads are

capped and carriage is locked.

5) Attach the cushioning materials and tape.

6) Unlock the casters on the stand, and then move the printer slowly by holding the carrying handles at the bottom.

If the printer is subjected to strong vibrations when it is moved, it can cause ink leakage or damage to the print head. Be sure to move the printer slowly and carefully.

Lengthwise: -30 to +30 degrees

Rotation: -30 to +30 degrees

Approximately 130 to 580ml of ink is consumed according to the ink remaining level in the subtank.

At this time, if the ink tank unit detects the state that the ink in any subtank is empty, ink drainage from all

ink passage of its ink tank unit is executed.

- The amount of ink consumption when the ink drainage from either ink tank unit is executed: approximately

360g

- The amount of ink consumption when the ink drainage from two ink tank units is executed: approximately

580g

Subtank

However, if the ink tank unit detects the state that the ink in any subtank is empty when performing this

mode, ink drainage from all ink passage of its ink tank unit is executed.