JVC KD-R992BT Instruction Manual page 26

AUDIO SETTINGS
BALANCE * 4
POSITION L15 to POSITION R15 (POSITION 00): Adjusts the left and
right speaker output balance.
VOLUME ADJUST LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level
of each source (compared to the FM volume level). Before adjustment,
select the source you want to adjust.
AMP GAIN LOW POWER: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 35.
SPK/PRE OUT (Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting to get the desired output. ( Speaker output settings)
SPEAKER SIZE
Depending on the crossover type you have selected ( [X ' OVER
TYPE]), 2-way crossover or 3-way crossover setting items will be shown.
( 23, Crossover settings)
X ' OVER
By default, 2-way crossover type is selected.
DTA SETTINGS
For settings, 25, Digital Time Alignment settings.
CAR SETTINGS
X ' OVER TYPE Caution: Adjust the volume before changing the [X ' OVER TYPE] to
avoid the sudden increase or decrease of the output level.
2-WAY (Displayed only when [3-WAY] is selected.)
YES: Selects two way crossover type. ; NO: Cancels.
3-WAY (Displayed only when [2-WAY] is selected.)
YES: Selects three way crossover type. ; NO: Cancels.
*
1
Displayed only when [SUBWOOFER SET] is set to [ON]. ( 21)
*
2
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W].
( 23)
*
3
For 2-way crossover: Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or
[SUB.W/SUB.W]. ( 23)
*
4
This adjustment will not affect the subwoofer output.
22
ENGLISH
SOUND EFFECT
SPACE ENHANCE (Not applicable for TUNER source.)
SMALL/MEDIUM/LARGE: Virtually enhances the sound space. ;
OFF: Cancels.
SND RESPONSE LEVEL1/LEVEL2/LEVEL3: Virtually makes the sound more realistic. ;
OFF: Cancels.
SOUND LIFT LOW/MIDDLE/HIGH: Virtually adjust the sound position heard from
the speakers. ; OFF: Cancels.
VOL LINK EQ ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
K2 TECHNOLOGY (Not applicable for TUNER source and AUX source.)
ON: Improve the sound quality of compressed music. ; OFF: Cancels.
Speaker output settings
[SPK/PRE OUT]
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY])
Select the output setting for the speakers [SPK/PRE OUT], based on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. ( 35)
KD-R992BT:
Setting on
[SPK/PRE OUT]
FRONT
REAR/REAR (default) Front speakers output Rear speakers output
REAR/SUB.W ( Not available )
SUB.W/SUB.W Front speakers output L (left): Subwoofer
Audio signal through lineout terminal
REAR
Subwoofer output
( Not available ) ( Not available )
Subwoofer output
output
R (right): (Mute)
SW