Radio - JVC KD-R992BT Instruction Manual

GETTING STARTED
CLOCK
TIME SYNC ON: The clock time is automatically set using the
Clock Time (CT) data in FM Radio Data System signal. ;
OFF: Cancels.
CLOCK DISPLAY ON: The clock time is shown on the display even when the
unit is turned off. ; OFF: Cancels.
ENGLISH
Select the display language for menu and music
РУССКИЙ information if applicable.
By default, ENGLISH is selected.
ESPANOL
6
ENGLISH

RADIO

For key layout on the faceplate, see page 3 or page 4.
Search for a station
1 Press source button repeatedly to select FM or AM.
2 Press to search for a station automatically.
(or)
Press and hold until "M" flashes, then press repeatedly to search for a
station manually.
• "ST" or "STEREO" lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the following button until "PRESET MODE" flashes.
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT: volume knob
KD-R891BT:
2
Perform 'select an item ( 3 or 4)' operation to select a preset number.
The preset number flashes and "MEMORY" appears.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Perform 'select an item ( 3 or 4)' operation to select a preset number.