JVC KD-R992BT Instruction Manual page 20

BLUETOOTH®
BATT/SIGNAL *
KD-R992BT/KD-R891BT:
AUTO: Shows the strength of the battery and signal when the unit detects
a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1
Press to enter Bluetooth mode.
"(First device name)" appears.
• If two Bluetooth phones are connected, press
to another phone.
"(Second device name)" appears.
2 Perform 'select an item ( 3 or 4)' operation to select an item
(see the following table).
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
To return to the previous setting item, press
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the following button to select a name or a phone number.
KD-R992BT/KD-R899BT/
KD-R794BT/KD-R792BT:
KD-R891BT:
• "<" indicates call received, ">" indicates call made, "M" indicates
call missed.
• "NO HISTORY" appears if there is no recorded call history or call
number.
2 Press the following to call.
KD-R992BT/KD-R899BT/
KD-R794BT/KD-R792BT:
KD-R891BT:
16
ENGLISH
again to switch
.
volume knob
volume knob
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Press
OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
2 Perform 'select an item ( 3 or 4)' operation to select a name.
3 Perform 'select an item ( 3 or 4)' operation to select a phone
number and to call.
• The phonebook of the connected phone is automatically transferred to
the unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as "Ú"
is showns as "U".)
1 Perform the following operation to select a number (0 to 9) or character
DIAL NUMBER
( , #, +).
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:
Turn the volume knob
KD-R891BT: Press
2 Press
1
Repeat steps and
3 Press the following to call.
KD-R992BT/KD-R899BT/KD-R794BT/KD-R792BT:
volume knob
KD-R891BT:
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( Make a call using voice recognition)
Make a call using voice recognition
1 Press and hold to activate the connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
to select the desired letter (A to Z, 0 to 9, and
to move the entry position.
2
until you finish entering the phone number.