Pc Connection - RCA L26WD26D User Manual

Connections & Setup

PC Connection

This is an example of a connection using the PC jacks.
1
Don't forget: If necessary,
connect antenna or cable to
get a picture. Go to page 6
for instructions.
Connecting the Device
This connection allows you to connect to a personal computer.
1. If necessary, connect your cable and/or off-air antenna as described on page 6.
2. Connect your monitor cable.
Connect one end of a 15-pin monitor cable to the PC MONITOR jack on the TV/DVD and the
other end to the PC's video output jack. Note, if your PC's video output isn't 15-pin, you'll need
an adapter that can connect to a 15-pin monitor cable.
3. Connect your audio cable.
Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8" stereo mini pin) to the
HDMI/PC AUDIO jack on the back of the TV and the other end to the Audio Output jack on
the PC.
Note: The maximum resolution is 1360 x 768. Be sure to set your PC to the correct monitor
output setting.
Viewing the PC
1. Plug in the TV and the PC, if they aren't already plugged in.
2. Turn on the TV and the PC.
3. Press the INPUT SELECT button on the remote control and select PC from the input list. To go
back to viewing TV channels, press the INPUT SELECT button and select ANT from the input list.
12
PC
MONITOR
PC/HDMI
AUDIO
2
3
Chapter 1