Preparation For Your New Tv; Check Accessories; Setup Tv Table Stand; Select Tv Location - RCA LED29B30RQ User Manual

as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the appratus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This TV should be operated only from the type of power supply
indicated on the rating label. If customer is not sure the type of
power supply in your home, consult your appliance dealer or local
power company. For TV remote control battery power, refer to the
operating instructions.
16. The TV set shall not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, shall be placed on the TV
set.
17. Never push objects of any kind into this TV through openings as
they may touch dangerous voltage or other electrical parts that
could result in fire or electric shock. Never spill liquid of any kind
into the TV.
18. Unplug the TV from the wall outlet before cleaning. Do not use
liquid or aero cleaners. Use a damp cloth for cleaning.
19. This TV should never be placed near or over a radiator or heat
resource. This TV should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
20. Do not place this TV on an unstable cart, stand, tripod, bracket, or
table. The TV may fall, causing serious injury to someone, and
serious damage to the appliance.
21. Do not attempt to service this TV by yourself because opening or
removing covers may expose you to dangerous high voltage or
other hazards. Refer all servicing to qualified service personnel.
22. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
23. WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instructions.
24. To reduce the risk of electric shock, the grounding of center pin of
plug must be maintained.
25. If an outside antenna or cable system is connected to the TV, be
sure the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA NO.70,
provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrodes. (See figure A)
E L E C T R I C S E R V I C E
E Q U I P M E N T
Safety Strap
Caution: Pushing, pulling or climbing on the TV may cause the TV
falling. Do not let chlidren climb or hang on the TV. Always place the TV
on a sturdy, level, stable surface that can hold the weight of TV. And if
possible, secure the TV according to the instruction below (Note: The
fastening components such as screws are not supplied with TV).
Step one: Insert the M6 mounting screws into the upper two wall
mounting screw holes and fasten them (Figure B).
Step two: Insert anchors to wall and connect the bolts and anchors
with ropes or chains (Figure C).
M6 Screws
Figure B
A N T E N N A
L E A D I N
W I RE
G R O U N D C L A M P
A N T E N N A
D I S C H A R G E U N I T
( N E C S E C T I O N 8 1 0 - 2 0 )
G R O U N D I N G C O N D U C T O R S
( N E C S E C T I O N 8 1 0 - 2 1 )
G R O U N D C L A M P S
P O W E R S E R V I C E G R O U N D I N G
E L E C T R O D E S Y S T E M
( N E C A R T 2 5 0 , P A R T H )
Figure A
Figure C

Preparation for Your New TV

Before Turning On TV

Check Accessories

Check the accessories that are packed with your TV.
REMOTE CONTROL
PART NO.: RE20QP80
CH LIST .
PICTURE
SOUND
LED LCD TV
User's Manual
Model Number.
LED29B30RQ
Please register your product at www.rca.com
Please keep your sales receipt and keep the record of
the serial number and the date of purchase in order to
receive warranty parts and service.
The serial number is located at the back of the TV.
USER'S GUIDE

Setup TV Table Stand

Please refer to TV Stand Installation guide in next page to carry out
stand installing.

Select TV Location

Select a flat, stable table to place your TV set. Please follow the Safety
Instructions when placing the TV.

Connection and Using

After placing your TV properly, you can connect the TV with power
supply and cable components. For further information, see page 4 to
page 5.
Note: Above accessories are subject to change without notice.

TV Stand Installation

TV LED29B30RQ is packaged with the TV stand separated from the
cabinet. To setup the TV table stand, please carry out the installation
according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the LED
LCD panel from being damaged.
Wall
Step Two
Take the neck. Please align the screw holes of the neck and the TV, and
then insert the 4 screws into the 4 holes on the neck and tighten them.
3
AAA BATTERIES
TV STAND BASE
DOCUMENTS
Part No.: RN0329R0100
Quick Start Guide
English
QUICK START GUIDE
The LED LCD panel can be
scratched easily, so please:
1. Choose an absolutely flat
surface to place the TV on.
2. Use soft cloth or cushion to
face the TV panel.
Do not put TV on the table
directly.
Always unplug the AC cord first
when installing/removing the stand.
TV STAND SCREWS
SCREWS
M4 x 10mm, 4pcs
Part# RS01PM410H
SCREWS
M4 x 12mm, 4pcs
Part# RS01PWA412HT
TV STAND NECK
The television is covered by one or more claims of the following
United States patents:
· U.S. Patent No. 5,511,096 · U.S. Patent No. 5,475,716
· U.S. Patent No. 5,621,761 · U.S. Patent No. 5,537,420
· U.S. Patent No. 5,703,887 · U.S. Patent No. 5,519,733
· U.S. Patent No. 5,745,522 · U.S. Patent No. 5,579,348
· U.S. Patent No. 5,511,082 · U.S. Patent No. 5,363,408
· U.S. Patent No. 5,371,902 · U.S. Patent No. 5,321,725
· U.S. Patent No. 5,233,629
· U.S. Patent No. 5,408,502
· U.S. Patent No. 5,311,546
· U.S. Patent No. 5,396,518
Part No.: RN4146AL05
PATENT CARD