Accessories; Machine Storage; Cutting Fluid Information; Service And Repair - RIDGID 1210 Operator's Manual

1210 Oil-less Threading Machine

Accessories

WARNING
The following RIDGID products have been designed
to function with the 1210 Threading Machine. Other
accessories suitable for use with other tools may be
hazardous when used on the 1210 Threading
Machine. To reduce the risk of serious injury, only
use accessories specifically designed and recom-
mended for use with the 1210 Threading Machine,
such as those listed in chart.
Catalog Model Description
No. No.
Machines
67872 1210 1/2" - 1" NPT, 115V, 25-60 Hz
Die Heads
67817 610 1/2" - 1" NPT, Quick-Opening, RH
Dies
67807 — 1/2" - 3/4" NPT Oil-less Gold, RH
67812 — 1" NPT Oil-less Gold, RH
Coolant
30693 — 1 Qt. Thread Cutting Fluid
Stands
67822 120 Folding Stand
Parts
41620 — Gearhead Motor Grease
33105 F3 Cutter Wheel
34780 — Cutter Wheel Pin and Clip
69412 — Jaw insert Set

Machine Storage

WARNING
The threading machine must be kept indoors or well
covered in rainy weather. Store the machine in a locked
area that is out of reach of children and people unfamil-
iar with threading machines. This machine can cause
serious injury in the hands of untrained users.

Cutting Fluid Information

Specific information on RIDGID thread cutting fluid, in-
cluding information about
• Hazard Identification
• First Aid Measures
• Fire Fighting Measures
• Accidental Release Measures
• Handling and Storage
• Personal Protective Equipment

• Disposal

• Transportation
is in the Material Safety Data Sheet (MSDS). This is
available at www.RIDGID.com or by contacting Ridge
Tool Technical Service Department at (800) 519-3456 or
techservices@ridgid.com.
14
Read and follow all instructions on the Cutting Fluid
Label and MSDS.

Service and Repair

Improper service or repair can make machine un-
safe to operate.
The "Maintenance Instructions" will take care of most of
the service needs of this machine. Any problems not ad-
Weight
dressed by this section should only be handled by an
lb. kg
authorized RIDGID service technician.
Tool should be taken to a RIDGID Independent Author-
59 26.8
ized Service Center or returned to the factory.
11 5.0
When servicing this machine, only identical replace-
ment parts should be used. Use of other parts may
1 0.5
create a risk of electrical shock or other serious injury.
1 0.5
If you have any questions regarding the service or repair
2 0.9 of this machine, call or write to:
12 5.5
1 0.5
— —
— —
— —
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool
Company at (800) 519-3456 or www.RIDGID.com
Disposal
Parts of this unit are valuable materials and can be re-
cycled. There are companies that specialize in recycling
that may be found locally.
Dispose of in compliance with any and all applicable reg-
ulations. Contact your local waste management authority
for more information.
Ridge Tool Company
WARNING
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44036-2023
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com