Advertisement
Fuji Xerox P-880 Technical Instructions
Photo 29
Photo 30
Photo 31
Photo 32
Photo 33
Step 30
Reinstall the doctor blade and the two
screws that hold the doctor blade.
(See Photo 29)
Step 31
Place the mag roller bearing, bushing and
drive gear back onto the mag roller. Install
the contact end of the mag roller into the
toner hopper. (See Photo 30)
Step 32
With the flat part of the mag roller axle
up, slide the mag roller back into position.
(See Photo 31)
Rotate the mag roller axle so the flat
area is facing the open area of the toner
hopper.
(See Photo 32)
Step 33
Install the toner hopper agitator drive
gear onto the alignment post.
(See Photo 33)
Notes
Need help with a particular remanu-
facturing problem?
Call the Technical Resource Center from
8am - 5pm PST: 800 394.9900
7
Advertisement
