Advertisement
4
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Photo 14
Photo 15
Photo 16
Photo 17
Photo 18
Fuji Xerox P-880 Technical Instructions
Step15
Rotate the drum 4-5 revolutions to ensure
the drum turns freely. Use a lint free cloth
to wipe off the padding powder from the
PCR. (See Photo 14)
Step 16
Set the waste hopper aside in a protected
area.
Step 17
Set the toner hopper up on its back.
(See Photo 15) Remove the three Philips
screws holding the toner hopper gear
end cap. (See Photo 16) Remove the end
cap.
Step 18
Slide the toner hopper agitator drive gear
off its alignment post.
(See Photo 17)
Step 19
Rotate the mag roller axle so the flat side
is facing up. (See Photo 18)
Advertisement
