Advertisement
Quick Links
4019 TECH
Technical Instructions
CORPORATE
LOS ANGELES, USA
US 1 800 394.9900
Int'l +1 818 837.8100
FAX 1 800 394.9910
Int'l +1 818 838.7047
ATLANTA, USA
US 1 877 676.4223
Int'l +1 770 516.9488
FAX 1 877 337.7976
Int'l +1 770 516.7794
DALLAS, USA
US 1 877 499.4989
Int'l +1 972 840.4989
FAX 1 877 774.1750
Int'l +1 972 840.1750
MIAMI, USA
US 1 800 595.429
Int'l +1 305 594.3396
FAX 1 800 522.8640
Int'l +1 305 594.3309
NEW YORK, USA
US 1 800 431.7884
Int'l +1 631 345.0121
FAX 1 800 431.8812
Int'l +1 631345.0690
SANFORD,USA
US 1 800 786.9049
Int'l +1 919 775.4584
FAX 1 800 786.9049
Int'l +1 919 775.4584
TORONTO, CAN
CAN 1 877 848.0818
Int'l +1 905 712.9501
FAX 1 877 772.6773
Int'l +1 905 712.9502
BUENOS AIRES, ARG
ARG 0810 444.2656
Int'l +011 4583.5900
FAX +011 4584.3100
MELBOURNE, AUS
AUS 1 800 003. 100
Int'l +62 03 9561.8102
FAX 1 800 004.302
Int'l +62 03 9561-7751
SYDNEY, AUS
AUS 1 800 003.100
Int'l +62 02 9648.2630
FAX 1800 004.302
Int'l +62 02 9548.2635
MONTEVIDEO,URY
URY 02 902.7206
Int'l +5982 900.8358
FAX +5982 908.3816
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX +27 11 974.3593
E-mail: info@futuregraphicsllc.com
Printers
Machine Compatibility:
Fuji Xerox 20
IBM Infoprint 20/ 4320
Apple LaserWriter 8500
Fujitsu 307A
Casio CP-DTC8
APTI-E 840
Ricoh NX5000
The Fuji Xerox P-880 engine was first found in the Apple Laserwriter 8500 back in
August of 1997, then two years later IBM released the Infoprint 20 using the same
engine.The large format Fuji Xerox P-880 engine propels its machines to a speed up
to 20 pages per minute at 600dpi and can handle multiple paper sizes including
11"x17" . The all-in-one cartridge design is similar to other Fuji Xerox engines
and looks like a cross between the Xerox N32 and the Xerox N17. 640 grams of
UltraFine toner fills the toner hopper and delivers 14,000 pages at 5% coverage.
However, with TonerMiser technology the machine can cut the toner usage in half
increasing the yield to 28,000 pages at 5% coverage.
Photo 1
Photo 2
Supplies
Anhydrous Isopropyl
Alcohol
Padding Powder
Soft Lint- Free Cloth
Swabs
Seal
640gm Toner
Drum
Doctor Blade
Wiper Blade
Step 1
Using needle nose pliers or a spring hook,
remove the tension spring located on the
end of the cartridge. (See Photo 1)
Step 2
With a pair of diagonal cutters remove
the cartridge pins located on each end
of the cartridge. (See Photo 2 & 3)
Photo 3
Website:
Tools
Punch
Hammer
Needle Nose Pliers
Diagonal Cutters
Philips Screwdriver
Small Flat Blade Screwdriver
www.futuregraphicsllc.com
1
Advertisement
Summary of Contents for Fuji Xerox P-880
- Page 1 FAX 1 877 774.1750 Int’l +1 972 840.1750 The Fuji Xerox P-880 engine was first found in the Apple Laserwriter 8500 back in MIAMI, USA August of 1997, then two years later IBM released the Infoprint 20 using the same US 1 800 595.429...
- Page 2 Fuji Xerox P-880 Technical Instructions Photo 4 Step 3 Separate the two sections of the Notes cartridge. (See Photo 4) Set the toner hopper aside. Photo 5 Step 4 Using a punch and a hammer, hit the drum axle out from the drive gear side of the hopper.
- Page 3 Fuji Xerox P-880 Technical Instructions Photo 9 Step 9 Dump out the toner from the waste hopper. Clean the hopper using dry Notes compressed air or a vacuum. Step 10 Apply padding powder to the wiper blade. Reinstall the blade and the two screws that hold the wiper blade in position.
- Page 4 Fuji Xerox P-880 Technical Instructions Photo 14 Step15 Rotate the drum 4-5 revolutions to ensure the drum turns freely. Use a lint free cloth Notes to wipe off the padding powder from the PCR. (See Photo 14) Step 16 Set the waste hopper aside in a protected area.
- Page 5 Fuji Xerox P-880 Technical Instructions Photo 19 Step 20 Slide the mag roller axle out away from the toner hopper. (See Photo 19) Notes Photo 20 Step 21 With the non-gear side of the mag roller free from the toner hopper, pull the axle out from the contact end of the toner hopper.
- Page 6 Fuji Xerox P-880 Technical Instructions Photo 24 Step 26 Using a small flat blade screwdriver release the clip that holds the toner seal Notes exit port plug. (See Photo 24) Photo 25 Step 27 Push the seal exit port plug out from the toner hopper from the inside.
- Page 7 Fuji Xerox P-880 Technical Instructions Photo 29 Step 30 Reinstall the doctor blade and the two screws that hold the doctor blade. Notes (See Photo 29) Photo 30 Step 31 Place the mag roller bearing, bushing and drive gear back onto the mag roller. Install the contact end of the mag roller into the toner hopper.
-
Page 8: Common Problems And Solutions
Fuji Xerox P-880 Technical Instructions Photo 34 Step 34 Place the endplate onto the end of the toner hopper making sure the half mooned shaped mag roller axle fits into Common Problems the recessed area on the endplate. (See Photo 34)