Advertisement
6
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
Photo 24
Photo 25
Photo 26
Photo 27
Photo 28
Fuji Xerox P-880 Technical Instructions
Step 26
Using a small flat blade screwdriver
release the clip that holds the toner seal
exit port plug.
(See Photo 24)
Step 27
Push the seal exit port plug out from the
toner hopper from the inside.
(See Photo 25)
Step 28
Clean the seal area using a swab and alco-
hol. (See Photo 26)
Remove the backing of the seal and apply
the seal to the toner hopper.
(See Photo 27)
Step 29
Slide the seal pull tab through the seal
exit port plug. Reinstall the seal exit port
plug.
(See Photo 28)
Advertisement
