Advertisement
Fuji Xerox P-880 Technical Instructions
Photo 9
Photo 10
Photo 11
Photo 12
Photo 13
Step 9
Dump out the toner from the waste
hopper. Clean the hopper using dry
compressed air or a vacuum.
Step 10
Apply padding powder to the wiper
blade. Reinstall the blade and the
two screws that hold the wiper blade in
position. (See Photo 9)
Step 11
Clean the PCR cradles using a swab and
alcohol. (See Photo 10)
Step 12
Reinstall the PCR. (See Photo 11)
Step 13
Apply padding powder to the drum and
install the drum. (See Photo 12)
Step 14
Slide the drum axle back through the
drum starting from the small gear side of
the drum. (See Photo 13)
Notes
Need help with a particular remanu-
facturing problem?
Call the Technical Resource Center from
8am - 5pm PST: 800 394.9900
3
Advertisement
