Amana CRC18T2OG Service Manual page 53

Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
Add Time during
Heating
6
Reset Door Open
7
Maximum Heating
Time
8
Manual Operation
9
Double Digit
Operation
RS2240002 Rev. 0
Display Options (Factory Settings in Bold)
OP:10
3 second continuous beep
OP:11 Continuous beep until door is opened
OP:12 5 beeps bursts until door is opened
OP:20 Eliminates beep
OP:21 Sets volume to low
OP:22 Sets volume to medium
OP:23 Sets volume to high
OP:30 Prevents beep when pad is pressed.
OP:31 Allows beep when pad is pressed.
OP:40 15 seconds after oven door is opened, keyboard disabled
OP:41 30 seconds after oven door is opened, keyboard disabled
OP:42
1 minute after oven door is opened, keyboard disabled
OP:43 2 minutes after oven door is opened, keyboard disabled
OP:50 Prevents adding heating time while oven is heating.
OP:51 Allows heating time to be changed while oven is heating
when a memory pad is pressed.
OP:60
Allows oven to resume heating time countdown after door is
opened during cycle.
Cancels heating time count down after door is opened during
OP:61
cycle.
OP:70
Allows 60 minutes of heating time.
OP:71 Allows 10 minutes of heating time.
OP:80 Allows use of preprogrammed pads only.
OP:81
Allows use of manual time entry and preprogrammed pads.
OP:90 Allows 10 (0-9) preprogrammed pads.
OP:91 Allows 100 (00-99) preprogrammed pads.
A–18