Pip (Picture-In-Picture) Operation; Pip Buttons; Using The Pip Feature - RCA F38310 User Manual

BASIC TV OPERATION

PIP (Picture-in-Picture) Operation

The PIP (Picture-In-Picture) feature lets you display a second, smaller
analog (NTSC format) picture on top of the main analog picture.
Your TV is equipped with a dual NTSC tuner that tunes to cable or off-air
television signals. You will only be able to use the PIP window and main
picture with analog channels.

PIP Buttons

There are certain remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the window.
Arrows Let you move the PIP window to different areas of the screen.
SWAP Switches, or "swaps," the video from the PIP window with the
main picture.
CH CTRL (Channel Control) Lets you switch channel control between
the PIP window and the main picture. To determine whether you are
controlling the PIP or the main picture, look at the channel banner as
you change channels. The triangular indicator is beside the channel
number for the picture you're controlling.
Main
picture
channel
number
Channel
control
indicator

Using the PIP Feature

While you may use PIP in different ways, this basic PIP scenario should
get you started. When watching an analog channel, follow these steps.
1. Press the PIP button on the remote control. The PIP window appears
on the screen.
2. Use the channel up and down or digit buttons to change the PIP
channel.
3. To change the program in the main picture window, press CH CTRL.
Then use the channel up and down or digit buttons.
To go back and forth between controlling the PIP window and the main
picture, press the CH CTRL button.
2 8
PIP channel
number
Note that you will only
be able to use PIP with
analog channels.
ON•OFF
VCR1 TV
DVD AUX DIRECTV
VCR2
MUTE SKIP
+
CH
CH
FETCH GO BACK
GUIDE INFO
OK
Arrows
MENU CLEAR
1 2 3
4 5 6
7 8 9
INPUT ANTENNA
0
REVERSE PLAY FORWARD
RECORD STOP PAUSE
PIP
PIP SWAP CH CTRL WHO
buttons