Important Information; Product Registration - RCA F38310 User Manual

Important Information

WARNING
To reduce the risk of fire or
electric hazard, do not
expose this product to rain
or moisture.

Product Registration

Please fill out the product registration card and return it immediately. Returning the card allows us to contact
you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record
the serial and model numbers in case you need them. The numbers are located on the back of the product.
Model No. ________________________________________________________
Serial No. _________________________________________________________
Purchase Date: ____________________________________________________
Dealer/Address/Phone: _____________________________________________
WARNING
RISK OF ELECTRIC
SHOCK DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference. FCC
Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it. Use of this device
without the supplied power cord may cause this set to be non-compliant with
FCC part 15 regulations.
If fixed (non-moving) images are left on the screen for long periods,
they may be permanently imprinted on the screen. Such images
include network logos, phone numbers, and video games. This
damage is not covered by your warranty. Extended viewing of
channels displaying these images should be avoided.
Cable TV Installer: This reminder is provided to call your attention to Article
820-40 of the National Electrical Code (Section 54 of the Canadian Electrical
Code, Part 1) which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as
practical.
To reduce the risk of electric shock, do not remove
cover (or back). No user-serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates
important instructions
accompanying the product.