RCA F38310 User Manual page 23

Using the Remote
GO BACK Moves you back and forth between the last two channels
selected in either DIRECTV mode or TV mode. For example, if you have
been viewing both DIRECTV
DIRECTV and TV "modes"), pressing GO BACK while watching a
®
DIRECTV channel moves you back to the last DIRECTV
viewed. Pressing it while watching a TV channel moves you to the last
TV channel you viewed. In the menu system, pressing GO BACK returns
you to the previous menu screen.
(Light Bulb Button) Press to illuminate some of the remote control's
buttons. To conserve battery power, the light turns off after several
seconds.
GUIDE When in TV mode, brings up the TV program guide. In DIRECTV
mode, brings up the DIRECTV
of the GUIDE button scroll through the different types of guides. Press
GUIDE after pressing INPUT to get a guide-like list of available video
input channels.
INFO Brings up channel and viewing information via the channel
banner. Quickly press again to bring up an extended channel banner
and press a third time to remove the banner. Press when in the program
guides to get more information on the highlighted program or channel.
ARROWS Used to point to different items in the menu system and
adjust the menu controls. Also move the PIP window when no menus
are on the screen.
OK When in the menu system and other on-screen displays, selects
highlighted items.
MENU Brings up the main menu and selects highlighted items. When
in using an RCA, GE, or PROSCAN VCR and in VCR mode, it functions as a
PROGRAM button.
CLEAR Removes on screen displays and returns to normal viewing. If
no displays are present and the skip timer is set, CLEAR will cancel the
commercial timer.
DIGIT BUTTONS (0 - 9) Enters channel numbers and time settings
directly though the remote control. For more information on entering
digits to change channels, see the section "Basic TV Operation." When in
the menus, the digit buttons can be used to directly select items without
using the arrows. 0 can be used to return to the previous menu screen.
INPUT Toggles through the available external input sources.
ANTENNA Switches the source of the off-air signal between the
HDTV's ANTENNA A and B. When in VCR mode, the ANTENNA button
also functions as a TV/VCR button.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc players, tape decks, and CD players when the remote is
in that mode. When in TV or DIRECTV mode, FORWARD will toggle
through screen formats.
PIP (Picture-in-Picture) When viewing an analog signal, brings up the
small PIP window. Press again to hide PIP.
SWAP Exchanges the main analog picture with the analog PIP window.
CH CTRL (Channel Control) Selects the picture window (either the
main or PIP window) that will change when you press the CH +, CH -,
INPUT, or digit buttons on the remote control.
WHO Toggles through user profiles.
® and TV channels (and thus using both the
® programming guide. Subsequent presses
Don't worry about getting stuck inside a
menu. Pressing the CLEAR button on the
remote control takes you out of the menu
system.
®
channel you
1 9