Quartz Wall Clock - Winnebago Suncruiser 1999 Owner's Manual

SECTION 8
APPLIANCES & INTERIOR FEATURES
Tension Adjustment:
The tension of the pleated shades can be
adjusted if they become loose and will not stay
up when raised, or they are too tight and are dif-
ficult to raise and lower.
To tighten the tension, simply wrap the
lower end of the guide cords (on each side of the
shade) a few turns around the spools at the lower
corners of the shades.
Spool
To loosen the tension, unwrap the guide
cords from the spools one turn at a time until
desired tension is achieved.
Preserving Shape:
The pleated shades are made using high
quality materials that are designed and woven to
retain their shape throughout their useful life.
They may lose their crisp shape, however, if left
in a lowered position for an extended period of
time without being raised periodically. If this
happens, the pleats can be restored using this
simple method.
• With the shade fully lowered, dampen the en-
tire area of the shade with a good quality
laundry sizing spray.
• Raise the shade fully while still damp and let
it remain in the raised position for about 24
hours, until the sizing has dried and "set".
• Reapply sizing periodically (every few
months) as needed.
8-20
Guide
Cord
We recommend that you fully raise pleated
shades when they are not needed, especially in
warm environments, to prevent them from losing
their shape.

QUARTZ WALL CLOCK

To Replace Battery
The clock may be mounted in a socket on the
face of the cabinet and held in place with bristle
pad material.
Carefully remove the clock from the socket by
alternately prying the left and right sides gently
outward.
After replacing the battery, simply press the
clock firmly back into the socket.