Regency Fireplace Products Horizon HZO42-NG Owners & Installation Manual
Horizon hzo42 series outdoor gas fireplace
Hide thumbs
Also See for Horizon HZO42-NG:
- Owners & installation manual (44 pages) ,
- Owners & installation manual (44 pages)
Table of Contents
Advertisement
Quick Links
Regency Horizon
www.regency-fire.com
WARNING:
If the information in these instructions
are not followed exactly, a fire
or explosion may result causing
property damage, personal injury or
loss of life.
WARNING:
Improper installation, adjustment,
alteration, service or maintenance
can cause injury or property damage.
Read the installation, operating and
maintenance instructions thoroughly
before installing or servicing this
equipment.
Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
Tested by:
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
918-882k
HZO42 Outdoor
®
Gas Fireplace
WARNING - FOR YOUR SAFETY
What to do if you smell gas:
•Shut off gas to the appliance.
•Do not try to light any appliance.
•Extinguish any open flame.
•If odour continues, keep away from the appliance and im-
mediately call your gas supplier or fire department.
•Do not touch any electrical switch: do not use any phone
in your building.
•Immediately call your gas supplier from a neighbour's
phone.
•Follow the gas supplier's instructions.
•If you cannot reach your gas supplier, call the fire
department.
WARNING:
Do not store or use gasoline or other flammable vapours
and liquids in the vicinity of this or any other appliance.
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
Installation Manual
MODELS: HZO42-NG
WARNING : FOR OUTDOOR USE ONLY
Owners &
HZO42-LP
Horizon HZO42 Product Video
01.15.17
Advertisement
Table of Contents
Related Manuals for Regency Fireplace Products Horizon HZO42-NG
Summary of Contents for Regency Fireplace Products Horizon HZO42-NG
- Page 1 Owners & Regency Horizon HZO42 Outdoor ® Installation Manual Gas Fireplace MODELS: HZO42-NG HZO42-LP Horizon HZO42 Product Video www.regency-fire.com WARNING : FOR OUTDOOR USE ONLY WARNING: WARNING - FOR YOUR SAFETY If the information in these instructions What to do if you smell gas: are not followed exactly, a fire •Shut off gas to the appliance.
- Page 2 To the New Owner: Congratulations! You are the owner of a state-of-the-art Gas Fireplace by REGENCY . The Horizon™ HZO42 Outdoor fireplace ® has been designed to provide you with all the warmth and charm of a fire at the flick of a switch. The Horizon™ HZO42 Outdoor fireplace has been approved by Warnock Hersey/Intertek for both safety and efficiency.
-
Page 3: Table Of Contents
table of contents safety label Drain Installation (Recommended) ......15 Wall switch and battery installation ......16 Wiring Diagram ............17 Copy of Safety Decal .............4 Hardwire kit Installation ..........18 AC adaptor Installation ..........22 Inner panel installation ..........23 dimensions Glass crystal installation ..........24 Volcanic stone installation ..........25 Unit Dimensions ............5 Optional Log Set Installation ........26... -
Page 4: Copy Of Safety Decal
safety decal This is a copy of the label that accompanies each HZO42 Outdoor Fireplace. We have printed a copy of the contents here for your review. NOTE: Regency units are constantly being ® improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one. -
Page 5: Unit Dimensions
dimensions UNIT DIMENSIONS ALL PICTURES / DIAGRAMS SHOWN THROUGHOUT THIS MANUAL ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCT MAY VARY DUE TO PRODUCT ENHANCEMENTS. Regency Horizon® HZO42 Gas Fireplace... -
Page 6: Important Message
installation IMPORTANT MESSAGE 5) To prevent injury, do not allow anyone who is DO NOT USE THIS APPLIANCE IF unfamiliar with the operation to use the fireplace. SAVE THESE ANY PART HAS BEEN UNDER WATER. INSTRUCTIONS IMMEDIATELY CALL A QUALIFIED 6) Wear gloves and safety glasses for protection while doing required maintenance. -
Page 7: Installation Checklist
installation LOCATING YOUR INSTALLATION GAS FIREPLACE CHECKLIST 1) Locate appliance: 1) When selecting a location for your fireplace, ensure that the clearances are met. a) Refer to "Locating Your Gas fireplace" section 2) This appliance must be installed in an open-air situation with natural ventilation, without stagnant b) Clearances to Combustibles (Refer to areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural "Clearances"... -
Page 8: Outdoor Appliance Installation Summary
installation IMPORTANT INFORMATION FOR OUTDOOR FIREPLACE INSTALLATIONS IMPORTANT THINGS TO REMEMBER • Never insulate around the body of the unit • Excessive heat retention in the firebox will lead to component failure • Correct Working Gas pressure is critical on “E” units and fireplace malfunction •... -
Page 9: Minimum Clearances To Combustibles
installation MINIMUM CLEARANCES TO COMBUSTIBLES The clearances listed below are Minimum distances unless otherwise stated: A major cause of fires is failure to maintain required clearances (air space) to combustible materials. It is of the greatest importance that this fireplace be installed only in accordance with these instructions. WARNING Caution Requirements Fire hazard is an extreme risk... -
Page 10: Framing Dimensions
installation FRAMING DIMENSIONS Framing Description HZO42 Dimensions Header Height 32-11/16” (30mm) Side Stud Width 42 - 3/16" (1072mm) Minimum framing depth 20" (508mm) Minimum Height to Combustibles 52 - 1/2" (1334mm) Minimum framing width 60" (1524mm) Corner Wall Depth 40 - 7/16" (1027mm) Corner Facing Wall Width 54 - 3/16"... -
Page 11: Mantel Clearances
installation MANTEL CLEARANCES Due to the extreme heat this fireplace emits, the mantel clearances are critical. Combustible mantel clearances from 12" (305mm) top of front facing are shown in the diagram on the right. Combustible Material Note: Ensure the paint that is used on the mantel and the facing is "heat resistant"... -
Page 12: Finishing
installation FINISHING IMPORTANT FINISHING DETAIL NOTE: Before placing unit into final position - it is important to know the total thickness / height of finished hearth. The base of the fireplace should be level or higher than the finished hearth height. I f material such as brick, stone, etc extends past the faceplate depth (1-1/2"), when finishing around the faceplate, the minimum opening dimensions noted below must be adhered to ensuring for the removal of the faceplate and for the safe operation of this appliance. -
Page 13: High Elevation
installation HZO42 SYSTEM DATA Burner 880 S.I.T. VALVE Max. Supply Pressure 14" WC (3.49 kpa) DESCRIPTION Flame Sensor Min. Supply Pressure 5" WC (1.25 kpa) Manifold Pressure 3.5" WC (0.87 kpa) 1) Pilot adjustment Orifice Size #29 DMS 2) Outlet Pressure Tap Maximum Input 44,500 Btu/h Pilot Ignitor 3) Inlet Pressure Tap (13.04 kW) 4) Pilot Outlet 5) Main Gas Outlet Note: If you have an incorrect flame pattern, 6) Main Gas Inlet contact your Regency dealer for further... -
Page 14: Unit Assembly Prior To Installation
installation UNIT ASSEMBLY PRIOR TO INSTALLATION NAILING STRIPS The 6 Standoffs must be correctly positioned and attached before unit is slid into position. The nailing strips come attached to the unit. There is 1 plate on each side and 1 on the top that can be folded out as required. Secure the top and side nailing strips to the framing. -
Page 15: Drain Installation (Recommended)
installation DRAIN INSTALLATION (RECOMMENDED) Although this fireplace is designed to operate outdoors safely, rain and other sources of moisture may enter the hearth area, which will cause water to col- lect inside the base of the unit. To prevent excessive water collection, the installer must provide a way to drain the water from the base of the unit by building or installing a water collector before positioning the fireplace in its location. -
Page 16: Wall Switch And Battery Installation
installation WALL SWITCH AND BATTERY INSTALLATION (INCLUDED WITH UNIT) The unit comes with low voltage wire and a battery extension wire installed. 6) Install supplied 4-AA batteries into the battery holder. Using velcro install battery holder to the backside of the battery compartment door. Connect 1) Run supplied wire to desired location - to a max. -
Page 17: Wiring Diagram
installation WIRING DIAGRAM This heater does not require a 120V A.C. supply for operation. (Do not cut the ground terminal off under any circumstances.) NOTE: 4 AA batteries must be installed in the battery pack to operate the burner switch. Proflame SureFire™ Switch 0.886.001 Proflame Valve Standard Wall Switch Standard Main On/Off Switch or Optional Wall Switch Remove the protective coating from the following components before proceeding. Carefully follow stainless handling instructions on following page. -
Page 18: Hardwire Kit Installation
OUTDOOR SERIES installation OPTIONAL HARD WIRE KIT INSTALLATION HARDWIRE KIT INSTALLATION A hard wire kit is available for this unit as an option, to hard wire this appliance, a qualifi ed electrician must remove the cord connection, and wire the appliance directly to the household wiring. This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. - Page 19 OUTDOOR SERIES installation 5. Plug in the supplied AC adaptor and run the wire through the bottom 10. HZO42/HZO60--Remove the burner tray by lifting up and out. of the outer box, be sure to use a grommet to protect the wire. 6.
- Page 20 OUTDOOR SERIES installation 20 | Regency Horizon® HZO42 Gas Fireplace 919-774 04.03.17...
- Page 21 installation OUTDOOR SERIES PTO50/PTO30/HZO42 WIRING DIAGRAM USING AC ADAPTOR 0.886.001 Proflame Valve Standard Main On/Off Switch or Optional Wall Switch PTO100/PTO60 WIRING DIAGRAM (2 X PTO50 / 2 X PTO30 ASSEMBLED END-TO-END) USING AC ADAPTOR Battery Holder ON/OFF Switch 919-774 04.03.17 Regency Horizon®...
-
Page 22: Ac Adaptor Installation
installation OUTDOOR SERIES AC ADAPTOR INSTALLATION AC ADAPTOR INSTALLATION A hard wire kit is available for this unit as an option (see hard wire kit instructions), to hard wire this appliance, a qualified electrician must remove the cord connection, and wire the appliance directly to the household wiring. This appliance must be electrically connected and grounded in accordance with local codes, if hard wired. -
Page 23: Inner Panel Installation
installation HZO42 PANEL INSTALLATION INNER PANEL INSTALLATION Before installation, panels must be handled and cleaned as per instructions noted below: Stainless Steel Panels • Stainless panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time. Claims for damage after installation will not receive consideration. -
Page 24: Glass Crystal Installation
installation GLASS CRYSTAL INSTALLATION Spread the Glass Crystals or Stones evenly over the burner. Ensure the crystals/stones do not overlap excessively as this will affect the flame pattern. IMPORTANT NOTE: Only the approved Glass Crystals and Stones are to be used with these fireplaces. Use of any other type of glass crystals or stones can alter the unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty. When using Ceramic Spa/Volcanic Stones DO NOT cover burner ports or pilot light that lead to pilot flame. BURNER PACKAGES Unit Glass Crystals Stones - Spa / Ceramic / Volcanic HZO42 3 lbs 3 lb Glass + 35 Volcanic stones There are 2 optional packages to choose from to cover the firebox base: 1) Natural River Pebbles 2) Glass Crystals (4 colors available) Spread the pebbles / crystals evenly on the exposed base of the firebox. Pebbles are NOT to be placed anywhere on the burner or over top of the Glass Crystals or optional Stones. IMPORTANT NOTE: O nly the supplied and approved pebbles / glass crystals are to be used with these fireplaces. Use of any other type of pebbles, glass crystals or other material can create a danger and will void the warranty. Firebox (Around Burner) Packages Unit Glass Crystals Pebbles... -
Page 25: Volcanic Stone Installation
installation OPTIONAL VOLCANIC/GARDEN STONES INSTALLATION ON BURNER VOLCANIC STONE INSTALLATION Evenly spread the glass crystals and volcanic stones over the burner. Ensure the stones do not overlap too much as this will effect the fl ame pattern. IMPORTANT NOTE: Only the supplied approved Volcanic Stones are to be used with these fi replaces. Use of any other type of stones can alter the unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty. -
Page 26: Optional Log Set Installation
OUTDOOR 42 installation LOG SET INSTALLATION OPTIONAL LOG SET INSTALLATION Installation of Refl ective Panels must be completed before installing the log set. Installation of Reflective Panels must be completed before installing the log set. Read the instructions below carefully and refer to the images. If the logs are broken do not use the unit until they are replaced. Broken logs can interfere with pilot operation. - Page 27 installation OUTDOOR 42 4) Install log D on the burner as shown below. Orient log D across log E in the same way and in a similar position as depicted in Diagram 5- log D will rest up against the back panel. Diagram 5 5) Install log F on the right side of the burner as shown below.
-
Page 28: Heat Deflector Installation
installation HEAT DEFLECTOR INSTALLATION 1) Install the heat deflector to the top inside of the firebox with 4 screws as shown below. Heat Deflector Heat Deflector Installed 28 | Regency Horizon® HZO42 Gas Fireplace... -
Page 29: Faceplate Installation
installation FACEPLATE INSTALLATION Remove the protective coating from the faceplate before installation - see For installations where thicker finishing material is used - the optional handling instructions in panel install section. trim piece may be installed to fill the gap. Install the trim between the bottom access panel and the faceplate as To install the faceplate - line up the tabs on the faceplate with the 'C' shown below. -
Page 30: Glass Wind Shield Installation
installation GLASS WIND SHIELD INSTALLATION 1) To install the glass wind shield - slot it into the space between the burner tray cover and the bottom access panel. Burner Tray Cover Glass Wind Shield Bottom Access panel WEATHER COVER INSTALLATION / REMOVAL 1) The unit should be covered when not in use for extended periods of time. - Page 31 OUTDOOR 42 installation ASSEMBLY INSTRUCTIONS FOR A STEEL STUD FRAMING KIT FOR HZO42 ASSEMBLY INSTRUCTIONS FOR A STEEL STUD FRAMING KIT FOR OUTDOOR 42 Follow these instructions to construct a steel stud frame for the Outdoor fi replace; Overall dimensions = 60" W x 20" D x 52-1/2" H. **Non-combustible fi...
- Page 32 OUTDOOR 42 installation 1) Place top/bottom (A) on the ground - fl at side down. Bend 3) Line up the screw holes of (A) with (B). Secure the tabs up to a 90° angle. each (B) with 2 wafer screws (one on each side) as shown below.
- Page 33 OUTDOOR 42 installation 6) Manoeuvre remaining (B) pieces and position in each corner 9) Position remaining 2 - (C) pieces offset from center rib as of the frame - fl at side facing out - see 2 diagrams below. shown below. 10) Position (D) on top of (C) pieces - line up screw holes and secure (D) to (C) with 12 wafer screws.
- Page 34 OUTDOOR 42 installation 12) LIne up screw holes on (E) (header) and (B) (inner vertical 14) Line screw holes on 1 (F) (corner brace) with (B) + (A) and support). Secure with 2 wafer screws on each side (4 total) secure with 4 wafer screws.
-
Page 35: Operating Instructions
operating instructions OPERATING FIRST FIRE AERATION INSTRUCTIONS ADJUSTMENT The first fire in your fireplace is part of the paint curing process. To ensure that the paint is properly 1) Read and understand these instructions before Open the air shutter for a blue flame or close for a cured, it is recommended that you burn your fireplace operating this appliance. yellower flame. The burner aeration is factory set for at least four (4) hours the first time you use it but may need adjusting due to either the local gas 2) Check to see that all wiring is correct and supply or altitude. When first operated, the unit will release an odour enclosed to prevent possible shock. caused by the curing of the paint, the burning off of Minimum Air Shutter Opening: any oils remaining from manufacturing. -
Page 36: Copy Of Lighting Plate Instructions
operating instructions COPY OF LIGHTING PLATE INSTRUCTIONS The lighting plate is located on the underside of the front access panel in the unit. A) This appliance is equipped with an ignition device which automatically lights the pilot. FOR YOUR SAFETY READ BEFORE LIGHTING CAUTION: Do not try to light the pilot by hand. -
Page 37: Maintenance Instructions
maintenance MAINTENANCE INSTRUCTIONS 1. Always turn off the gas valve and unplug the batteries before cleaning. For relighting, refer to lighting instructions. Keep the burner and control compart- ment clean by brushing and vacuuming at least once a year. When cleaning the logs, use a soft clean paint brush as the logs are fragile and easily dam- aged. -
Page 38: Valve Assembly Replacement
maintenance VALVE ASSEMBLY REPLACEMENT 1. Turn the unit off and allow it to cool down to room temperature. 9. Remove the front access panel by lifting up and out. 2. Turn off the gas supply to the unit. 3. Remove trim. 4. Remove the faceplate by lifting it up and off the unit. 10. Remove the burner tray by lifting up and out. 5. Remove the glass wind shield by lifting it up and out- place on a soft surface. 11. Remove left and right screws from the burner legs. 6. Remove the screw and panel clip on the right side. Remove the right side panel once the clip has been removed. 7. Remove the screw and panel clip on the left side. Remove the left side panel once the clip has been removed. 8. Remove the back panel once the 2 side panels have been removed. 38 | Regency Horizon®... - Page 39 maintenance 12) Slide the burner to the right and lift up and out of the firebox. 13) Remove 6 screws in locations shown below to access DFC. 6th screw located at back 14) Remove 6 screws an lift out valve tray. 15) Replace with new valve tray and reverse steps.
- Page 40 maintenance DIGITAL FIREPLACE BURNER CONTROL REMOVAL 5. Disconnect the Black sparker wire with black spade connector from CN3. Remove 6 screws in locations shown below to access DFC. See Diagram 2 below. 6th screw located at back Diagram 2 Sparker Wire 6.
-
Page 41: Main Assembly
parts list MAIN ASSEMBLY Part # Description Part # Description 326-552 2" Faceplate assembly 326-036 Top nailing strip 326-009 Heat Deflector 326-037/F Side nailing strip 904-777 Orifice # 29 (NG) 940-368/P Glass Windshield 904-434 Orifice # 47 (LP) 911-024 Valve NG 880 SIT IPI On/Off 0.880.001 911-012 (DFC) Digital Fireplace Control 911-025... -
Page 42: Parts List
parts list BURNER ASSEMBLY Part # Description Part # Description 326-525 Burner Assembly NG 904-777 Orifice #29 NG 326-525 Burner Assembly LP 904-434 Orifice #47 LP 10) 326-574/P Valve Assembly - NG 326-930 Log Set 10) 326-576/P Valve Assembly - LP N/S 910-100 Pilot Orifice - NG N/S 910-101... -
Page 43: Accessories
parts list ACCESSORIES Part # Description 13) 326-021 Panel Rear (Brushed Stainless) 326-022 Panel Left (Brushed Stainless) 326-023 Panel Right (Brushed Stainless) 14) 940-368/P Glass windshield 15) 326-552 Faceplate Brushed Stainless 946-676 Copper Glass Crystals 946-695 Garden Stones 326-034 Clip Inner Panel HZO42 (Brushed SS) (Each) 326-066 Trim Filler (Brushed SS) 948-223... -
Page 44: Warranty
warranty Limited Warranty FPI Fireplace Products International Ltd. (for Canadian customers) and Fireplace Products U.S., Inc. (for U.S. customers) (collectively referred to herein as “FPI”) extends this Limited Warranty to the original purchaser of this appliance provided the product remains in the original place of installation. The items covered by this limited warranty and the period of such coverage is set forth in the table below. - Page 45 warranty Replacement units are limited to one per warranty term. Unit must be installed according to all manufacturers’ instructions as per the manual. All Local and National required codes must be met. The installer is responsible to ensure the unit is operating as designed at the time of installation. The original purchaser is responsible for annual maintenance of the unit, as outlined in the owner’s manual.
- Page 46 warranty Limitations of Liability: The original purchaser’s exclusive remedy under this warranty, and FPI’s sole obligation under this warranty, express or implied, in contract or in tort, shall be limited to replacement, repair, or refund, as outlined above. IN NO EVENT WILL FPI BE LIABLE UNDER THIS WARRANTY FOR ANY INCIDENTAL OR CONSEQUENTIAL COMMERCIAL DAMAGES OR DAMAGES TO PROPERTY.
- Page 47 warranty Product Registration and Customer Support: Thank you for choosing a Regency Fireplace. Regency strives to be a world leader in the design, manufacture, and marketing of hearth products. To provide the best support for your product, we request that you complete a product registration form found on our Web Site under Customer Care within ninety (90) days of purchase.
- Page 49 notes Regency Horizon® HZO42 Gas Fireplace...
- Page 50 notes 50 | Regency Horizon® HZO42 Gas Fireplace...
- Page 52 Installer: Please complete the following information Dealer Name & Address: ______________________________________________ ___________________________________________________________________ Installer: ___________________________________________________________ Phone #: ___________________________________________________________ Date Installed: ______________________________________________________ Serial No.: __________________________________________________________ Horizon HZO42 Product Video Regency Horizon is a trademark of FPI Fireplace Products International Ltd. © Copyright 2018, FPI Fireplace Products International Ltd. All rights reserved. Printed in Canada...