Omron 3F88L-160 User Manual page 55

Design
D Wiring Example
The following wiring example is for four-digit display of the Resolver speed.
Cam Output Connectors
Signal name
CAM13 (CAM29)
CAM14 (CAM30)
Display data
CAM15 (CAM31)
CAM16 (CAM32)
Common cam
COM/0V
output terminal
1-digit LE signal CAM12 (CAM28)
CAM16 (CAM32)
2-digit LE signal
3-digit LE signal CAM16 (CAM32)
4-digit LE signal CAM16 (CAM32)
Note 1. The cam output signal names not in parentheses will be displayed for 3F88L-160 Cam Posi-
tioners and the names in parentheses will be displayed for 3F88L-162 Cam Positioners.
Note 2. The circled terminal numbers have been provided for convenience. When assembling the
socket, pay attention to the direction of the polarity guide and connect the wires as shown in
the above terminal layout.
Note 3. The case mark (Y) indicates the first digit of the M7F terminal number and is different from the
connector Y mark described previously.
Note 4. A display example is shown below.
w Resolver speed display
Pin No.
Blue
A8
Green
A5
Yellow
A4
Orange
A3
Red
A2
Purple
A7
Gray
A8
White
A9
Black
A10
12 to 24 V DC
rpm
Unit Nameplate
V
Power
supply
input
Power
supply
output
Case mark
Chapter 2
M7F Display Unit
2-29