Siemens sitrans LR 400 Instruction Manual page 50

4.2.6.7 Tank Characteristic (for qualified personnel only)
4.2.6.8 Calibrate/table or Calculate (for qualified personnel only)
The value of Parameter 4.2.6.8 is determined by the selection (Calibrate/table
Note:
or Calculate) in Parameter 4.2.6.7.
4.2.6.8 Calibrate/table
4.2.6.8.1: Calibrate (for qualified personnel only)
4.2.6.8.2: Enter table (for qualified personnel only)
4.2.6.8.3: Show table (for qualified personnel only)
4.2.6.8.4: Clear table (for qualified personnel only)
or
4.2.6.8 Calculate
4.2.6.8.1: Tank design (for qualified personnel only)
4.2.6.8.2: Bottom design (for qualified personnel only)
4.2.6.8.3: Tank volume (for qualified personnel only)
4.2.6.8.4: Tank height (for qualified personnel only)
4.2.6.9: Density (for qualified personnel only)
4.2.7.x: User1 Parameters (for qualified personnel only)
All parameters in range 4.2.7.x are for Factory Authorized Personnel only. Advanced echo
processing parameters should only be modified by qualified personnel.
4.2.8.x: User2 Parameters (for qualified personnel only)
All parameters in range 4.2.8.x are for Factory Authorized Personnel only. Advanced echo
processing parameters should only be modified by qualified personnel.
4.3: Analog Output
4.3.1: Error Level (F = D: Error Signal)
Level for the error signal to alarm in Analog or Digital output
Value
7ML19985JC02
D: Error Signal
D+F: Error Signal
D+F+W: Error Signal
SITRANS LR 400 (Solids) – INSTRUCTION MANUAL Page 47