Sharp LC-50U35T Service Manual page 21

LC50/58/65U35T
13. How to write Serial Number
After change New Main board, change "Model and Panel Size" and write "Serial Number".
13.1. Change Model and Panel Size and Volume type.
1. Enter the adjustment process mode.
2. Point the cursor to [MODEL NAME].
3. Select model, and press [Enter] key.
4. "OK" is displayed.
5. Point the cursor to [PANEL SIZE].
6. Select Panel Size and press [Enter] key.
7. Moments later image is displayed.
8. Point the cursor to [Volume Type]
9. Select Volume Type, and press [Enter]key.
10."OK" is displayed.
Example
U35T
11. Turn off power.
12.Turn on power.
65U35T
50U35T 58U35T
0 1 2
VOLUME TYPE
5 – 13