Sharp LC-50U35T Service Manual page 20

LC50/58/65U35T
12. Writing the inch and model name and volume type on EEPROM.
1. Enter the adjustment process mode.
2. Point the cursor to [MODEL](Page 17/17)
3. Select model(U35T), and press [Enter] key.
4. "OK" is displayed.
5. Point the cursor to [PANEL SIZE] (Page 17/17).
6. Select size(65,58,50) and press [Enter] key.
7. Moments later image is displayed.
8. Point the cursor to [Volume Type]
9. Select Volume Type, and press [Enter]key.
10."OK" is displayed.
11. Turn off power
12.Turn on power
5 – 12