Table of Contents
Advertisement
No.
Category
Teradici PCoIP
This section provides an overview of the host driver installation process.
Installing the Teradici PCoIP Card Host Dual/Quad
Install the PCoIP host driver software from dell.com/support.
NOTE:
You cannot upgrade the PCoIP host driver software while a VMware View-brokered PCoIP session is active between a
host workstation or host PC and VMware View client. Doing this will result in losing access to your mouse and keyboard when
the driver software is removed.
To upgrade the PCoIP host driver software in this type of deployment, do one of the following:
•
Connect to the host from a zero client.
•
Upgrade the software while connecting to the host through another desktop-remoting protocol such as RDP or VNC.
Installing the PCoIP Host Driver Software on a Host PC:
1
Download the PCoIP host driver software from the Teradici Support site (click Current PCoIP Product and Releases).
2
Log in to the administrative web interface for the host card.
3
From the Configuration > Host Driver Function menu, enable the Host Driver Function.
4
Restart the host PC.
5
Install the PCoIP host software package appropriate for the operating system installed on the host PC. You can start the install
process by double-clicking the installer:
a
64 bit: PCoipHostSoftware_x64-v4.3.0.msi (or later)
6
When the Welcome screen appears, click Next.
7
Accept the terms, and then click Next.
8
Ensure that the installation location is correct, and click Next.
9
Click Install.
NOTE:
For Windows 7, when the driver is installed, a Windows Security dialog may appear. Click Install to continue with the installation.
To keep this dialog box from appearing in the future, select Always trust software from Teradici Corporation.
10
If prompted, restart the operating system; otherwise, skip this step. When restarted, the host driver software installation process
continues when the OS boots up. Click Install to continue.
11
Click Finish to complete the installation.
MegaRAID 9440-8i and 9460-16i controller
Small and medium businesses (SMBs) deploying entry-level server platforms and workstations need affordable, reliable storage solutions.
The MegaRAID Tri-Mode Storage Adapter is a 12Gb/s SAS/SATA/PCIe (NVMe) controller card that addresses these needs by delivering
proven performance and RAID data protection for a range of non-business crticial applications. The MegaRAID Tri-Mode storage adapters
bring NVMe performance benefits to the storage tier by providing connectivity and data protection for SAS/SATA interfaces. Based on the
dual-core SAS3516 or SAS3508 RAID on Chip (ROC) and 72-bit DDR4-2133 SDRAM, these controllers provide bandwidth and IOPS
64
Technology and components
Technology
Browser Path
•
HOST: PCIe x1 PCoIP Dual Host Card (TERA Gen 2)
•
CLIENT: Dell or other Branded Zero Client (TERA Gen 2)
(Dell-Wyse P45 ) QUAD Monitor Support
•
HOST: PCIe x1 PCoIP Quad Host Card (TERA Gen 2)
•
Support Dual Terra Card configurations
NOTE:
For further information about the Teradici PCoIP
Card host driver installation, see
Teradici
PCoIP.
Hide quick links:
Advertisement
Table of Contents
