Installing The System Board; System Board Components - Dell Precision 7920 Owner's Manual

Installing the system board

1 Align and place the system board onto the chassis and slide it back to its position.
2 Tighten the screws to secure the system board to the chassis.
3 Connect all the cables to the connectors on the system board.
4 Install the:
a rear system fan
b processor heat sink module
c GPU
d memory module
e front system fan
f PCIe card holder
g air shroud
h front bezel
i side cover
5 Flip the system to connect the SATA 0 cable to the connector on the system board.
6 Install the right side cover
7 Follow the procedure in

System board components

Figure 1. Components of the system board
After working inside your computer
Removing and installing components 59