Table of Contents
Advertisement
3
Install the:
a
right side cover
b
PSU
4
Follow the procedure in
Front HDD cable and fan assembly
Removing the front HDD cable and fan assembly
1
Follow the procedure in
2
Remove the
right side cover
3
To remove the front HDD cable and fan assembly:
a
Remove the four screws securing both the fan brackets to the chassis [1].
b Press the tabs of the connector to disconnect the SATA 0 cable from the connector on the system board [2].
c
Press the tabs to disconnect the power cable and remove it from the plug [3].
d Disconnect the fan cables from the connectors on the power distribution and fan control board [4].
CAUTION:
end. Pulling on the cable wires may loosen them from the connector.
4
Remove the HDD fan bracket from the chassis.
After working inside your computer
Before working inside the
Do not pull the connector by the cable wires. Instead, disconnect the cable by pulling on the connector
computer.
Removing and installing components
43
Hide quick links:
Advertisement
Table of Contents
