NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Power supply unit (PSU)
Removing the PSU
1
Follow the procedure in
2
Disconnect the power cable from the system.
3
Press the PSU release latch [1] and slide the power supply away from the system [2].
NOTE:
If the PSU cannot be removed then remove the right side cover of the system and check if the PSU is secured with
a screw.
Installing the PSU
1
Slide in the power supply unit to the PSU slot on the system.
2
Connect the power cable to the system.
3
Follow the procedure in
Side cover
Removing the side cover
1
Follow the procedure in
Before working inside your
After working inside your computer
Before working inside your
computer.
computer.
Removing and installing components
11