Installing the front HDD cable and fan assembly
1
Connect the fan cables to the connectors on the power distribution and fan control board.
2
Connect the power cable to the connector on the power distribution and fan control board.
3
Connect the SATA 0 cable to the connector on the system board.
4
Replace the front HDD cable and fan assembly into their slots on the chassis and secure them with screws to the chassis.
5
Install the
right side cover
6
Follow the procedure in
Fan bracket
Removing the fan from the fan bracket
1
Follow the procedure in
2
Remove the:
a
side cover
b
system fan
3
To remove the fan from the fan bracket:
a
Slide out the four rubber grommets for each fan from the fan chassis [1].
b Lift the fan and remove it from the fan assembly [2].
44
Removing and installing components
After working inside your computer
Before working inside your
computer.