Dyson Pure Cool Operating Manual page 12

Changing the carbon filters
1
Important: Always unplug the
Unplug the appliance from
appliance before changing filters.
the mains electricity supply.
The remaining filter life is shown in
the display and will indicate when
Slide the buttons down on
the non-washable carbon filter both sides of the shrouds.
needs replacing.
Dispose of used filter units in
accordance with local regulations.
22
2 3
x2
x2
The shrouds will release with the To remove the carbon filters:
glass HEPA filters attached.
pull the tabs on both sides of
x2
the filters.
Dispose of the carbon filters in
the bin.
x2
x2 x2
x2
clik
4 5
x2
x2 x2
x2
x2
x2
clik
Push the new carbon filters onto Push the shrouds until they click
the base until secure. back into position in the base.
x2
clik
x2
clik
clik
6
click
Plug the appliance in to the mains
electricity supply and switch on.
Important
7
5
sec
Press and hold the Oscillation button
on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The carbon filter
level will be reset and the appliance
is ready to use.
23