Date And Time Displays; Correcting The Date Or Time - RCA Pro809 User Manual

Date and Time Display
Setting the Time and Date Display in the Viewfinder
– and +
Make sure the lithium battery cell is installed and a power source is connected to
the camcorder.
1. Place CAMERA/OFF/VCR switch in
CAMERA.
2. Place DATE/TIME/NORMAL/TITLE
switch in DATE/TIME.
3. Press SET to display a flashing cursor
on the month.
The flashing cursor lets you know
which part of the display you are
setting.
12:00AM
1/1/94
Month
Day
Year
4. Press + or – to enter the correct digit.
Press and hold + or – to rapidly
advance the digits.
(continued)
SET
ON/OFF
–
SET ON/OFF
RESET Z/MEMORY OSD
CHAR– CHAR+ SET ON/OFF
Hours
Minutes
AM or PM
DATE/TIME/
NORMAL/
TITLE
Switch in
DATE/
TIME
DATE/TIME
NORMAL
TITLE
CAMERA/OFF/VCR
Switch in CAMERA
(Located on other side.)
5. Press SET. The flashing cursor will
move to the next part of the display.
6. Repeat steps 3 and 4 until you have
entered the correct month, day, year,
hour, minute, and AM or PM.
7. After you select AM or PM, press SET
to remove the flashing cursor from the
viewfinder and start the camcorder's
internal clock.

Correcting the Date or Time

To correct the date or time after the clock
has been started, place DATE/TIME/
NORMAL/TITLE switch in DATE/TIME.
Repeatedly press SET to place the
flashing cursor on the digit you want to
correct. Then enter the correct digit using
the + or – button.
29