Battery Safety Precautions - RCA Pro809 User Manual

Powering Your Camcorder
Using the Battery to Power Your Camcorder
BATT EJECT
To Attach Battery
If the power connector is attached to the
camcorder, remove it before attaching the
battery.
• Hold the battery flush against the
camcorder and slide it to the right as
shown.
Make sure it is firmly attached to the
camcorder.
Remove the Battery
Press and hold BATT EJECT while
sliding the battery to the left and off the
camcorder.
ATTENTION:
PURCHASED USES A RECHARGEABLE BATTERY. AT
THE END OF ITS USEFUL LIFE, UNDER VARIOUS STATE
AND LOCAL LAWS, IT MAY BE ILLEGAL TO DISPOSE OF
THIS BATTERY INTO THE MUNICIPAL WASTE STREAM.
CHECK WITH YOUR LOCAL SOLID WASTE OFFICIALS FOR DETAILS
IN YOUR AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL.
20
(continued)
THE PRODUCT THAT YOU HAVE
(continued)
CAMERA/OFF/VCR Switch

Battery Safety Precautions

Do not short the battery's terminals.
Do not attempt to disassemble or
modify the battery. There are no user-
serviceable parts inside.
Use the battery only with specified
adapter/chargers and camcorders.
Throwing the battery into a fire or
exposing the battery to excessive heat –
over 149º F (65º C) could be hazardous.
Ni - Cd