Pip (Picture-In-Picture) Operation - RCA F32715 User Manual

Features and menus

PIP (Picture-in-Picture) Operation

The PIP (picture-in-picture) feature lets you display a second, smaller
picture on top of the main picture. If the PIP window is displayed, and you
change the PIP input (by pressing WHO•INPUT) to COMP2, PIP is not
displayed. If you press the PIP button while viewing COMP2, the PIP
window is not available. (N/A) appears in the channel marker.
PIP Buttons
There are seven remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the
window.
If you selected Alternate with PIP button in the PIP Closed-Caption
Display menu, press the PIP button when the PIP window is on the
screen to toggle between PIP on, PIP on with closed captions, and PIP
off.
MOVE buttons let you move the PIP window to different
areas of the screen.
SWAP Switches, or "swaps," the video from the PIP window
with the main picture.
CH CTRL (Channel Control) Lets you switch channel control
between the PIP window and the main picture.
For instance, press PIP to bring up the PIP window. You can change
channels by entering channel numbers or pressing the CH^ (channel up) or
CHv (channel down) buttons. When you press the CH CTRL button the
channel control switches to the main picture. You can now change
channels in the main picture by entering channel numbers or pressing the
CH^ or CH v buttons.
Press CH CTRL again to return the channel control to the PIP
window.
Two Tips for Using PIP Buttons
Skip to PIP: Channel Surfing in the Main Picture
You can surf through the channels during commercial breaks using the
SKIP and CH (channel) buttons.
1. Press SKIP to set the commercial skip timer and bring up the PIP
window.
2. Press the CH ^ or CH v buttons to surf through the channels in the
main picture. When the SKIP feature times out, the main picture will
tune to the original channel automatically.
Channel Surfing in the PIP Window
You can use the PIP window to surf through channels as well.
1. Press PIP to bring up the PIP window.
2. Press the CH^ or CHv buttons. The TV begins displaying each channel
in the PIP window. If you see a channel that interests you, press SWAP.
VCR1 ON OFF
TV
DVD VCR2 AUX SAT•CABLE
MUTE SKIP
SOUND GO BACK
INFO
GUIDE
OK
MENU
CLEAR
ANTENNA
WHO•INPUT
REVERSE PLAY FORWARD
REC•VCR+ STOP PAUSE
PIP SWAP CH CTRL RESET
PIP buttons
A typical use of SWAP is to scan through
channels in the PIP window, and when
you find a channel you like, press SWAP
to display that channel in the main
picture, sending the current channel to
the PIP window.
Move
buttons
51