Time Menu - RCA F32715 User Manual

Features and menus
The choices for each screen are:
Not Connected Choose this if you do not have a component
connected to an antenna or video input on the back of the TV, or if
you don't want the TV to tune to a channel when the particular
component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your component is
connected to the antenna jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the specified
component button. Reminder: Make sure the component's Ch 2/3/4
switch is set to channel 2.
Channel 3 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 4.
Video 1 Input Choose this if your component is connected to the
INPUT1 jacks on the back of the TV and you want the TV to tune to
VID1 (SVID1 if you used an S-Video cable) input channel when you
press the specified component button.
Video 2 Input Choose this if your component is connected to the
INPUT2 jacks on the back of the TV and you want the TV to tune to
VID2 (COMP2 if you used the Y P
press the specified component button.

Time Menu

Sleep Timer Displays a control panel that lets you select the amount
of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you set up a schedule for
turning the TV on and off automatically. Make sure to turn the
schedule on. The on-screen directions guide you through the steps
needed to set the schedule.
Set Time Displays a control panel that lets you enter the current time.
The on-screen directions guide you through the steps needed to set the
time. If your GUIDE Plus+ Gold System is setup and running then it will
automatically update your time and this option will not be available.
36
P jacks) input channel when you
B R